2005-2006 Kawasaki ZX6R, 636 Ninja Frame Sliders Install Instructions

2005-2006 Kawasaki ZX6R, 636 Ninja Frame Sliders Install Instructions
By Roland Lee

These sliders have been designed to offer unsurpassed protection to your 2005 Kawasaki ZX6R 636 Ninja in the unfortunate event of a lowside or tip over. Motovation frame sliders are designed and manufactured by a company that only makes frame sliders. Each and every model is tested for drop and slide protection. They are tough but not brittle and can also absorb a huge impact. Sportsriders around the world who have tested various models of our products on the track have all given their thumbs up after experiencing first hand, the benefits of Motovation Frame Sliders.

Please read all instructions before beginning work! These frame sliders are designed to fit specific engine mounts of your 2005 Kawasaki ZX6R 636 Ninja. This kit has separate left and right pieces (left and right while sitting on the bike). It is highly recommended that you refer to your service manual before performing this installation. Some fairing modification is required on the left side.

Included in this frame slider kit:
(1) 10mmX90mm 1.25 pitch bolt (left)
(1) 10mmX130mm 1.25 pitch bolt (right)
(2) Aluminum bushings (pressed into slider)
(2) Plastic Frame Sliders (left -longer, right-shorter)

INSTRUCTIONS:

Left Hand Side ( Sitting On Bike )
Remove left side fairing.
Remove( See picture ) correct engine bolt and save the nut.
Replace with the provided left frame slider ( Longer Aluminum Spacer) and 100mm bolt and re-use the stock nut.
Tighten the frame slider to the manufacturer’s recommended torque settings.
Replace the fairing and mark the edge of the fairing that needs modification. Tape fairing over with masking tape and dremel the fairing till it just clears the frame slider. Reinstall fairing.

Right Hand Side ( Sitting On Bike )
Remove ( See picture ) correct engine bolt and save the nut.
Install the provided right frame slider ( Shorter Aluminum spacer ) and 130mm bolt and re-use nut.
Tighten the frame slider to the manufacturer’s recommended torque settings.

DO NOT OVERTIGHTEN.

Motovation Accessories is the distributor of quality Kawasaki frame sliders and accessories. http://www.motovationusa.com Go to: http://www.motovationusa.com/ZX6R_05.html for more pictures.

Article Source: http://EzineArticles.com/?expert=Roland_Lee
http://EzineArticles.com/?2005-2006-Kawasaki-ZX6R,-636-Ninja-Frame-Sliders-Install-Instructions&id=158484

motorcycle repair
 
 
 
 
motorcycle repair and troubleshooting

– Home Repair Tips –
- Vehicle Repair -
 
 
 
•
•
•
•
Motorcycle Repair Directory
•
•
•
•
•
•
•
•
•
 
•
•
•
•
•
•
•
•
•
•
Motorcycle Repair & Troubleshooting
   Tires
   Brakes
   Chain
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Motorcycle Repair
- 2007 - 2008 -
Yamaha Motorcycles
Suzuki Motorcyles
BMW Motorcycles
Ducati Motorcycles
Triumph Motorcycles
•
•
•
•
•
•
•
•
Custom Search
Search Motorcyle Repair
Custom Search
Search Motorcyle Repair
motorcycle-repair
motorcycle-repair
Ninja Frame Sliders